정보기술2008. 3. 28. 16:03
http://www.heidi.ie/eraser/

파일 영구 삭제 기능을 가진 프로그램 중, GPL 기반 프로그램입니다.


Eraser Quick Start Guide

Also, have a look at:
- Eraser Getting Started Flash Tutorial

-
Eraser FAQ Page
-
Eraser Forum


You tell Eraser what to erase, you are in control.

You can create a Task in the Scheduler to Erase certain Files/Folders/Unused Disk Space.

And you can set this to run on particular days or each day or on Reboot.
1. Eraser runs from the Taskbar.
2. Right click on the Icon and select Open.
3. Click on File on the menu and select New Task.
It is very easy from there. The Help menu is worth clicking on.

To Erase files/folders:
1. Open Windows Explorer.
2. Right click on the file/folder you want to erase and you
will see an 'erase' option on the menu. Choose it if you
wish to erase the file.


To erase the contents of your Recycle Bin:
1. Right click on your Recycle Bin.
2. Choose Erase Recycle Bin.


To erase unused disk space (files that have only previously been deleted):
1. Open Windows Explorer.
2. Right Click on the Drive and choose 'Erase Unused Space'.


To erase your entire hard disk:
Eraser uses the 'Darik's Boot and Nuke' disk option to erase all your hard drives.
To use this option:
1. Place a floppy (or CD) in your a: drive.
2. Click on the Start button and then choose Programs->Eraser->Create Boot Nuke Disk.
3. Ensure 'Writing on Floppy' is ticked. Tick 'Formatting' if your floppy needs to be formatted.
4. Click OK. Result: Your Boot Nuke Disk has now been created.
5. Boot up your PC with the floppy still remaining in your a: drive.
Remember: If you wish to erase the Hard Disk of another PC, then bring this Floppy to the PC, insert it into the a: drive and Boot it up.
Result: All drives will now be erased (including the Operating System)
IMPORTANT: USE WITH EXTREME CAUTIONFor a summary:
'
Darik's Boot and Nuke' ("DBAN") is a self-contained boot floppy that securely wipes the hard disks of most computers. DBAN will automatically and completely delete the contents of any hard disk that it can detect, which makes it an appropriate utility for bulk or emergency data destruction.'

To erase the hard disk of a computer where Eraser cannot be installed onto:
You don't need to install Eraser onto the PC where you are going to erase.
Take the following steps:
1. Connect to the Internet using your new PC and download and install Eraser.
2. Place a floppy (or CD) in the a: drive of your new PC.
3. Click on the Start button and then choose Programs->Eraser->Create Boot Nuke Disk.
4. Ensure 'Writing on Floppy' is ticked. Tick 'Formatting' if your floppy needs to be formatted.
5. Click OK. Result: Your Boot Nuke Disk has now been created.
6. Bring this Boot floppy to your old PC and place it in the a: drive.  Now reboot the old PC.
Result: All drives will now be erased (including the Operating System)
IMPORTANT: USE WITH EXTREME CAUTION.

'정보기술' 카테고리의 다른 글

[lua2exe] lua 로 exe 먼들기  (0) 2008.04.24
코더 되기 (원래는 해커 되기)  (2) 2008.04.04
[파일 영구 삭제] GPL Eraser  (0) 2008.03.28
웹브라우저와 ACID3  (2) 2008.03.24
빅맥 대 제이미  (0) 2008.01.19
롤플레잉 게임과 프로젝트  (0) 2007.12.31
Posted by 어쩌다보니 Jay Two

댓글을 달아 주세요