'Snow Leopard'에 해당되는 글 1건

  1. 2009.11.13 Mac OS X Snow Leopard 에서 Wireshark 1.2.3 설치
Wireshark2009. 11. 13. 22:12

1> Wireshark 1.2.3 (SVN Rev 30730) 를 다운받는다.
   http://media-2.cacetech.com/wireshark/osx/Wireshark%201.2.3%20Intel.dmg

2>  Readme  문서의 설치 절차에 따라 설치한다.

 2-1>  Wireshark.appApplications 에 드래그앤 드랍
 2-2> Utilities  / Command Line 경로아래에 있는 것들을  /usr/local/bin 아래로 복사한다.
             권한문제가 있기 때문에,
             sudo cp * /usr/local/bin 등으로 복사한다.

 2-3> ChmodBPF  경로를 StartupItems 로 드래그앤 드랍한다.
         (그안의 실행파일을 실행하면 권한 문제를 해결해 준다...)

3> wireshark.app 을 실행한다. 실행시에 X11이 함께 실행된다.

4> 실행하면 다음과 같은 경고 창이 계속 뜬다. (약간 버그...)

The following errors were found while loading the MIBS:
-:0 1 module-not-found failed to locate MIB module `IP-MIB'
-:0 1 module-not-found failed to locate MIB module `IF-MIB'
-:0 1 module-not-found failed to locate MIB module `TCP-MIB'
-:0 1 module-not-found failed to locate MIB module `UDP-MIB'
-:0 1 module-not-found failed to locate MIB module `SNMPv2-MIB'
-:0 1 module-not-found failed to locate MIB module `RFC1213-MIB'
-:0 1 module-not-found failed to locate MIB module `IPV6-ICMP-MIB'
-:0 1 module-not-found failed to locate MIB module `IPV6-MIB'
-:0 1 module-not-found failed to locate MIB module `SNMP-COMMUNITY-MIB'
-:0 1 module-not-found failed to locate MIB module `SNMP-FRAMEWORK-MIB'
-:0 1 module-not-found failed to locate MIB module `SNMP-MPD-MIB'
-:0 1 module-not-found failed to locate MIB module `SNMP-NOTIFICATION-MIB'
-:0 1 module-not-found failed to locate MIB module `SNMP-PROXY-MIB'
-:0 1 module-not-found failed to locate MIB module `SNMP-TARGET-MIB'
-:0 1 module-not-found failed to locate MIB module `SNMP-USER-BASED-SM-MIB'
-:0 1 module-not-found failed to locate MIB module `SNMP-USM-DH-OBJECTS-MIB'
-:0 1 module-not-found failed to locate MIB module `SNMP-VIEW-BASED-ACM-MIB'


5> 그럴 경우는 다음과 같이 처리한다.
Edit / Preferences 메뉴를 선택 ...
• Wireshark: Preferences / Name Resolution 선택
SMI (MIB and PIB) paths 에서 Edit 버트 클릭
SMI Paths 창에서 the New 버튼 클릭
SMI Paths: New 창의 name 텍스트 박스에서, /usr/share/snmp/mibs/ 를 입력

6> wireshark 를 재시작한다.

7> 성공적인 설치 상태이면, 캡춰 옵션에서 네트워크 카드가 잡힌다. (en0, en1 등)
 
--------------
...위와 같은 과정으로 해도 문제가 있는 이는
...리플을 달아주십시오...
반응형

'Wireshark' 카테고리의 다른 글

Wireshark와 Putty로 원격 Linux 패킷 캡춰하기  (0) 2016.09.12
원격(Remote)으로 Wireshark 사용하기  (0) 2009.11.10
ethereal  (0) 2007.03.23
Posted by Jay Two